npi电子工程师岗位职责

1.协助业务完成报价，提供技术支持；
2.熟练使用PADS软件，熟悉设计电路原理图；
3.熟悉基础元器件的原理，具备元器件选型、电路调试、电性能指标测试和验证能力；
4.负责提交产品的DFM报告,参与电子评审；
5根据要求制定电子部分《project schedule》，并交NPI主管审核；
6.协助项目工程师组织一起召开项目会议,如启动会议,EP,PP等;
7.结合公司设备设计新产品的工艺，制定新产品的检验标准、方法和手段；
8.对新产品工艺以及测试问题进行跟进指导,提出制造辅助工具及工装、夹具的方案以及所需购买的设备、仪器清单，确定项目所需的零件、原材料并认定供应商；
9.负责新产品BOM等工程资料制作,样品打样及工程样机制作；
10.负责跟踪前期生产，指导监督全部生产过程，及时解决生产中遇到的问题。
11.负责对承担项目的电子资料分类归档；
12.协助客户对老旧产品的升级提供技术支持；
13.具备对不良品的分析能力并提出改善对策。
任职要求：
1、大专及以上学历，电子专业；
2、三年以上经验，有消费性电子产品经验优先；
3、掌握专业基础知识扎实.有良好的沟通技巧；
4、掌握Protel,CAM350，熟练使用示波器,了解射频测试设备:蓝牙测试仪,频谱仪,网分仪；
5、英语能够基本读写，邮件沟通，读懂相关技术文件。

岗位职责:
1.电子类新产品导入（NPI)，新产品试产问题点解决
2.新项目导入时负责同客户沟通电子技术问题。产品导入后，负责跟进ES,PP,MP过程相关的电子问题，制作试产报告。
3.参与新产品报价，DFM 报告(Design fManufacturing),BOM，ECO，ECR核对确认，制作新产品规格书。
4.协助解决生产问题，为其他部门提供电子技术支持。
5. 参与电子料供应商的审核评估。

岗位要求：
1.大专及以上学历，熟悉电子电路分析，熟练各种设计软件和维修测试仪器；
2.5年以上电子行业开发经验，或5年以上NPI工作经验；
3.熟悉电子产品硬体与软件设计过程，动手能力强， 熟悉电子产品制造流程 (NPI)， 熟悉工厂各个部门之间的运作流程，能单独承担特定项目的工作；
4.沟通协调能力强，工作执行能力强，服从上级领导的工作安排。

福利待遇：
1、包吃包住，买五险一金；
2、每满半年有7天探亲假，满一年有年假12天，另每满一年增加1天福利假；
3、每年享有调薪机会，享有年终奖、节日福利。

Job Responsibility:
NPI product owner – 80%
●Collaborate with the R&D team from the early development stage to fully understthe electrical design test requirements of new products provide PCBA manufacturability assessments test coverage proposals.
●Support the design team in new board bring-up, as well as FPGA firmware quick verification to accelerate product development cycles.
●Define the manufacturing test plan fPCBA, drive the implementation of ICT, FCT, other test processes at PCBA manufacturing sites, provide necessary performance review analysis to ensure compliance with design requirements quality standards.
●In collaboration with the design team, define manufacturing test items Pass/Fail criteria from an electrical/hardware perspective foptical electrical layer modules, line cards, integrated line system boxes.
●Partner with the test development team to execute electrical-related test procedures, validate test methods, analyze test results, which may include functional testing, BER testing, system link testing, sanity testing, environmental stress testing, etc.
●Lead the diagnosis of product electrical failures, including defining, analyzing, validating issues, tracking improvements resolutions to ensure the production yield meets target requirements.
Mass / transfer product support – 10%
●Provide technical support ffactory mass production, including product knowledge transfer, process know-how sharing, test coverage optimization.
●Review the correlation of test bench expansion drive yield improvement initiatives.
●Support the proposal, verification, implementation of cost reduction projects.
●release manufacturing-related documents such as BOMs.
Customer focus – 10%
●Provide timely responses technical support fRMA (Return Merchandise Authorization) of both NPI mass-produced products.
●Collect provide manufacturing processes, product, component build history data to the R&D team customers when requested.
Job Requirements:
●Bachelor’s degree in Electronics, Electrical Engineering, Telecommunication, an equivalent technical discipline from an accredited college university is required; master’s degree is preferred.
●Minimum 3 years of working experience in the telecom products related industry within a globalganization.
●Familiar with analog digital circuit technologies semiconducttechnologies, with hands-on experience in debugging I2C, SPI, PCIe bus protocols.
●Proficient in using test tools such as multimeters, oscilloscopes, communication test instruments (e.g., VIAVI, EXFO, Spirent) to independently complete diagnostic tasks.
●Familiarity with the electrical/hardware architecture of communication product control systems is a plus; experience in electrical design testing is also desirable.
●Knowledge of Ethernet OTN protocols, with the ability to configure test equipment using these protocols.
●Demonstrated strong problem analysis resolution capabilities, with a data-driven approach to troubleshooting.
●Excellent teamwork communication skills, with the ability to collaborate closely with R&D production teams to achieve business objectives.