Chongqing Huicheng Aluminum Co., Ltd.

I. Company Profile
Chongqing Huicheng Aluminum Co., Ltd. was established on November 15, 2013. It is a joint-stock limited liability company jointly established in China with Dalian Huicheng Aluminum Co., Ltd. as the investing entity. The company is located in Beidu Aluminum Industrial Park, Qijiang District, Chongqing, with a registered capital of RMB 200 million. The project covers an area of 800,000 square meters, with a total project investment of RMB 2.5 billion. It is divided into five phases of construction. After full production, the annual production capacity can reach 600,000 tons, and the expected annual revenue is RMB 5 billion. The company's main production method uses molten aluminum as raw material to process various aluminum alloy products. The production process integrates aluminum alloy melting and casting, casting, die-casting, and extrusion, striving to build a complete domestic aluminum alloy product industrial chain. The company is mainly engaged in the research, development, and production of aluminum and aluminum alloy ingots, large cross-section aluminum alloy round and flat ingots, oil and gas tapered drill pipes, automobile and motorcycle wheels and parts. Its product development and production provide qualified raw materials for China's large industrial aluminum alloy extrusion and forged aluminum sheets and strips, automobile and motorcycle engines, gearboxes, clutches, foot pedals, and wheel hubs. The first phase of the company covers an area of 80,000 square meters and has been completed and officially put into operation. The company has advanced equipment and technology, including 2 sets of 25T circular reflective melting furnaces for aluminum alloy ingots, 1 set of 25T energy-saving dual-chamber recycled aluminum melting furnace, 2 sets of 30-ton circular energy-saving holding furnaces, 1 set of aluminum alloy production line and automatic ingot stacking machine, 3 sets of 25-furnace rectangular aluminum melting furnaces for producing aluminum alloy ingots, and a same-level hot-top fully automatic casting production line. The initial supply specifications of the company's products are 6kg aluminum alloy ingots, round ingots with diameters between φ80mm and φ700mm, and flat ingots with widths within 1800mm. At present, the company has 5 melting and casting production lines, with an annual production capacity of 150,000 tons, including 80,000 tons of casting alloy ingots for auto parts and 70,000 tons of deformation aluminum alloy ingots. With the continuous expansion and development of railways, transportation, electric power, and other industries, especially the rise of vehicle aluminum profiles in the domestic railway and subway industries, product applications will become more extensive. The company has an internationally advanced testing center, and the main testing equipment and instruments are all imported products. Among them, the maximum tensile force of the electronic universal testing machine is 100KN, with an accuracy of 0.2 thousandths. The EDC controller is a German component, which can realize compression, bending, and tensile tests of profile samples, and is used to test various performance indicators such as tensile strength, yield limit, elongation, and elastic modulus. High and low temperature environmental tensile testing can realize performance tests of test materials at any temperature from -70 to 360°C. The automatic temperature control system can achieve an accuracy of ±1°C. This equipment provides a strong hardware guarantee for product development and scientific experiments. The OES SPECTROMETER direct-reading spectrometer is specially configured for testing the chemical composition of cast aluminum alloys and wrought aluminum alloys. Its 28 channels can perform rapid analysis of 26 elements, with an accuracy of within 1ppm. It is easy to operate, fast, and highly accurate. The German Leica metallographic microscope can realize the measurement and analysis of the microstructure of metal materials and other materials (25x-1000x), and inspect the internal structure of materials. The entire testing, analysis, and image output process can be completed within 3 minutes. The microhardness tester MH-6 model, with a microscope optical structure of 100x/400x and an automatic rotating turret, can realize hardness measurement and determination of microstructure and automatically print technical data and experimental reports. The company aims at international and domestic high-tech, mainly producing oil and natural gas tapered drill pipes of 2xxx and 7xxx series alloy products, used for product development of 7xxx series alloy products. At the same time, it will also produce automobile and motorcycle wheels and parts. High-quality, high-performance industrial profiles and plates requiring 2xxx, 5xxx, 6xxx, and 7xxx series alloys are the main production projects. The company focuses on introducing and building large-tonnage environmentally friendly and energy-saving melting and holding furnaces. High-performance automatic control electromagnetic stirring equipment can effectively stir molten aluminum without contact, making the chemical composition and temperature of the melt uniform. At the same time, it can reduce the formation of oxidation slag, shorten melting time, improve productivity, greatly reduce the labor intensity of workers, greatly improve the quality of aluminum alloy, and improve the overall segregation of molten aluminum. Its stirring effect has reached the international level of similar products. Online degassing and online purification and refinement can significantly refine the alloy casting structure, suppress cracks and macro segregation of alloy elements, improve the surface quality of ingots, and purify the melt. The company has first-class scientific research and development technology. With the guarantee of mature markets in the industrial chain of enterprises within the group, its products have the strength and conditions to integrate and build the largest aluminum alloy industrial base in Southwest China. Moreover, with the rapid development of China's economy, the demand for new materials is constantly expanding, and among them, "replacing steel with aluminum" is becoming a trend. Large cross-section aluminum alloy ingots are used for aluminum and its alloy plates, strips, foils, tubes, rods, profiles, wires, forgings, and other products, and have been widely used in many fields such as aviation, aerospace, railway transportation, electric power, shipbuilding, chemical industry, construction, and vehicle profiles. In addition, the infrastructure of Beidu Aluminum Industrial Park is relatively complete, and transportation is very convenient, with good land, water, railway, and air transportation conditions. The company will surely win rapid and good development.
II. Wages and Benefits
1. Salary is negotiable. Those with high skill levels and rich experience will be treated favorably. Production line employees implement piece-rate wages.
2. Five social insurances and one housing fund, free accommodation and working meals.
III. Recruitment Contact Information
Contact person: ***
QQ: **********：591656987
Email: cwj@*; 591656987@*
Company homepage: *